JANSEN LUMBER TRAILER HRW-15
**COLLECTION ONLY**
Here we can offer you an affordable lumber trailer from the brand Jansen with highly complex features.
The lumber trailer is equipped with hydraulic all-wheel drive, which can be switched on and off, to ensure that it can be moved with ease even on very uneven terrain. The all-wheel drive can be switched on electrically via a magnetic valve.
The lumber trailer is hydraulically supported.
The loading crane, included as part of delivery, has a swivel range of 180 degrees and a maximum reach of 3.2m. At the maximum jib length of 3.2m, the crane has a lifting capacity of 200kg. At 2.0m the crane can lift 300kg. The crane has a hydraulic grab which can rotate 360 ??degrees.
The total loading capacity of the lumber trailer is 1,500kg.
The hydraulic unit also comes as part of delivery and is powered using a 6.5 HP 4-stroke petrol engine.
The cable winch is powered hydraulically and can be operated via remote control, which makes lifting cut trunks much easier, as you can stand directly next to the trunk and operate the winch using the remote control. The steel cable of the winch has a length of 20 meters.
The trailer can be moved easily using the tow bar. Many of our customers tow the trailer with an ATV, quad or small tractor. These allow flexibility on narrow paths. The trailer is not permitted for transport on public roads. The trailer is not permitted for transport on public roads.
This model has sold successfully for years in Scandinavia under a different brand name.
Technical specifications:
- 4-stroke OHV engine, 6.5 HP
- Fuel type: petrol
- Tank capacity: 5 l
- Starter: Recoil starter
- Weight: 620 kg without fluids
- Weight including packaging: 670 kg
- Load capacity: max. 1,500 kg
- Crane swivel range: 180 degrees
- Crane reach: max. 3.20 m
- Lifting power of crane: 300 kg at a jib length of 2 m
- Width of grab: 750 mm
- Cable winch: hydraulic, 20 m steel cable
- Trailer coupling and towing mechanism included
- Tires: 22x11x8
- Operating pressure of hydraulic oil: 190 bar
- Switchable, hydraulic all-wheel drive
- Support: hydraulic, 2-fold
- Assembled dimensions: 390x135x100 cm (LxWxH)
- Dimensions of packaging: 360x80x170 cm (LxWxH)
- Amount of engine oil: approx: 0.8 l (10W40 or 15W40)
- Hydraulic oil tank capacity: approx. 9 l (HLP46)
Please note that all Jansen equipment is sold subject to these conditions in addition to our standard T&C's.