Contact us for a price



(Scotland & Ireland will incure an additional
shipping surcharge, for a
complete shipping cost to these locations please
contact us)

Current delivery and despatch times are running at around 2 weeks,
please bear this in mind when ordering.

The SMA-700T is our newest model circular saw, with an 700 mm circular saw blade.

You can saw through logs in a fraction of a second with this saw. With a direct, virtually loss-free belt drive, you will hardly notice the blade gliding through the log.

The rocker can be extended on the left side in order to create a larger bearing area for the wood where necessary; an approx. 20 cm extension is included as part of delivery.

On the right side, the rocker has a guide, with which you can saw your wood to exact measurements. The guide consists of a solid flat-iron section, and is completely stable. In many drag saws, only a thin, flimsy metal or plastic guide is used, which often does not last for very long and which quickly becomes bent or broken. With our guide you can saw cut precisely to a maximum of 56 cm.

The hammer blow varnish is very durable and resistant. The diameter of the wood to cut may measure up to a maximum of 270 mm and be of minimum 25 mm. To ensure safe working and clamping, the saw comes equipped with gripping tongs with which you feed the wood to the blade.

A further difference to many competing products is that our saw meets all valid regulations and has undergone an EC type-examination.

Technical specifications:

  • Drive: Belt drive
  • Rotational speed saw blade: max. 1440 Rpm.
  • Diameter of blade: 700mm, carbide tipped
  • Diameter of blade, intake: 30 mm, tooth pitch: 32 mm
  • Width of blade: 3.2 mm
  • Total weight: 136 kg
  • Dimensions: 109x85x110 cm (LxWxH)
  • Weight including packaging: 156 kg

Please note that all Jansen equipment is sold subject to these conditions in addition to our standard T&C's.