Kellfri Flail Mowers W

Flail mowers with up to 28 hammer flails and a working width of 1.95 m.

• For 18-60 hp tractors
• 20-28 hammer flails
• Adjustable support roller
• Adjustable skids on sides
• Chain protection against stone chipping
• Oil included

Practical, versatile flail mower for 18-60 hp tractors

The flail mowers in the Kellfri W series are built to cope with everything from cutting pastures and grassland to clearing overgrown land with saplings. Flail mowers in the W series are the choice for you if you want a simple, long-lasting machine that has spent many years in development. They suit you if you have both smaller and larger grasslands to look after.

The fast rotation speed ensures that the forged hammer flails can easily hack and cut all types of material, giving you a dependable machine. 

The Kellfri W flail mowers has a working width of 1.25m to 1.95m, making them practical for flailing, topping or cutting smaller grasslands and grassed areas. The flail mowers have a fine-toothed welded counter bar in the chassis to break up the grass more effectively.

Each mower has an adjustable support roller and chain guards. The cutting height is adjusted by the support roller and skids. The adjustable support roller guarantees a correct cutting height on uneven ground. The cutting height can be adjusted between 0-55 mm, enabling you to cut the grass close to the ground and thus achieve a more level result. The grass is evened out and the remnants moulder away faster. The support roller has a scraping iron to keep the roller free from cut material.

The front of the flail mower is fitted with chain guards that adapt to the substrate and protect both the tractor and the surroundings from stone chipping and grass spray. The flail mower is fitted as standard with hammer flails. There are up to 28 flails in total, ensuring that the grass is broken up. The flail mower is also adapted for Y-flails, which can be purchased additionally (not included). 

The flail mowers are adapted for tractors between 18 - 60hp and is connected to the tractor's power take-off, giving it an input speed of 540 r/min. This gives a rotor speed of 2295 r/min. The 3-point linkage can be manually side shift adjusted for lateral adjustment.

The flail mower's chassis is made of 4 or 5 mm thick steel. The flail mower is supplied with PTO drive shaft as standard.

Oil included. Check the oil level before first use. Some images show Flail mower W 1.75 m.

WORKING WIDTH 1250mm to 1950mm
CHASSIS 4 or 5 mm steel
ENGINE POWER 18 - 60 hp
COLOUR Green
BELTS 2 or 3 x Bx40 Li1016
CUTTING HEIGHT 0 - 55 mm
ROTOR SPEED AT 540 RPM 2295 rpm
ROTOR ROLLER 108 mm ø
SIDE SHIFT ADJUSTMENT Manual. 100 mm
FLAILS 20 to 28 hammer flails
THREE-POINT LINKAGE Cat 1 PTO SPEED 540 rpm