ELIET Prof 6 Shredder (on wheels)

The ELIET Prof 6 green waste Shredder (on wheels) is equipped with a Turbo Discharge™ system: a suction turbine creating a vacuum effect that sucks the green waste into the shredder and then blows the shredded material out through a rotating blow chute. The permanent air flow of the turbo generator constantly cleans the system, so that clogging is virtually impossible.

The resulting ‘BioTech’ chips have a favourable fibre structure that breaks down fast. These BioTech chips can contribute to improving a composting system or be used as filling material for garden borders.

This wheeled model is equipped with hydraulic wheel drive. The operator can control the speed and direction of traction on the two wide clawed tires using a control unit on the handlebar. Intuitively, the operator steers the machine in the desired direction with swivel wheels.



ABM SYSTEM

The ELIET PROF 6 has an additional feature, namely an ABM system (Anti-Block Motor). This ingenious system fully autonomously regulates the feed speed. A sensor meticulously controls every change in the revolutions of the engine.

V-SAFE INFEED HOPPER

The specially shaped V-safe infeed hopper ensures that larger parcels of pruning waste can be fed in quickly and safely.

BLADE TURBINE

Natural trimming chips are not discharged on the basis of the removal force of the blade system, but are carried away by the powerful airflow generated by the 325 mm blade turbine.

BLOW CHUTE

The Prof 6 blow chute is a fine example of engineering. Its shape prevents turbulence and the design of the curve was based on the optimal trajectory of the fl ying chips. As a result the machine has phenomenal propelling capacity. The choice for synthetics as the material for the blow chute was a very deliberate one: it is seamless, corrosion resistant, perfectly smooth and sound absorbing. Its low air resistance makes the chute less inclined to clog. The blow chute has a discharge height of 1,8 m / 6 ft and a rotation span of 280°.

AGRICULTURAL TYRES WHEEL DRIVE

The wheels of the new Prof 6 were equipped with a powerful wheel motor. The speed forward or in reverse is controlled with a simple movement from the pulse via a rotating handle on the handlebar. The more the handle is rotated forwards or backwards, the faster the machine moves in that direction. The wheel drive is so powerful that it takes only one man to load or unload the machine from a van or a trailer.

BLADES

The blades that are fitted to the Prof 6 are not ordinary steel blades. The Prof 6 is designed to operate at least 8 hours a day. The blades have been specially designed so that their blade life matches the workload and duty cycles.

MAINTENANCE-FRIENDLY

Under the “FAST PITSTOP” motto, the machine is designed to be dismantled in record time to access the critical maintenance points. This typically does not require any tools. You can perform a quick check-up or routine maintenance at the end of each working day. It also facilitates somewhat more involved maintenance. This keeps the machine in top working order so it can deliver optimal performance every day.

Display SKU : EL-MA 032 010 131
Model : Eliet Prof 6 Shredder (on wheels)
Engine Make : B&S Vanguard 400 ES
Engine Power : 14 hp
Feed Roller : Hydraulic
Material Diameter : 10cm
Working Performance/h : 4 m³
Chopping Speed (cuts/min) : 48,000
Blades : 24 Eliet ResistTM /8
Discharge Height : 1800mm
Dimensions : L1780 x W810 x H1520mm
Weight : 361kg