STIHL FS 94 RC-E BRUSHCUTTER

Lightest brushcutter in this segment.

STIHL 1-point anti-vibration system, ErgoStart, loop handle suitable for where access may be difficult, control handle with ECOSPEED partially loaded function, STIHL 2-MIX engine, straight shaft and shoulder harness.

Standard features

Reduced-emission engine technology

2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

Manual fuel pump (Purger)

A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

STIHL ErgoStart (E)

STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

Simplified starting system

Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

Loop handle (R)

The loop handled grass trimmers and brushcutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs.

STIHL ECOSPEED

STIHL ECOSPEED enables the user to control the brushcutter engine speed individually on the operating handle.

Anti-vibration system

Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

---

Technical data

Capacity cm3 24.1
Performance kW 0.9
Performance PS 1.2
CO² ­ g/kWh 794
Weight kg 1) 4.6
Sound pressure level with mowing head dB(A) 2) 93
Sound pressure level with metal tool dB(A) 2) 93
Sound power level dB(A) 2) 108
Vibration value, left with mowing head m/s2 3) 6.1
Vibration value, right with metal tool m/s2 3) 5.5
Vibration value, left with metal tool m/s2 3) 5.5
Vibration value, right with mowing head m/s2 3) 6.1
Total length cm 4) 178
Displacement cm³ 24.1
Power output kW/bhp 0.9/1.2
Weight kg 5) 4.6
Standard cutting tool AutoCut 25-2
Tank volume l 0.54

1) Without fuel, cutting tool and without protection
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool
5) without cutting tool and deflector